CHECK OUT OUR PROMOTIONS HERE

 

C5 555 test

Toggle Icon

Test 1 duy anh test

Category Link Icon
Toggle Icon

Hieu's Category 2

Category Link Icon
Toggle Icon

Hieu's Category 3

Category Link Icon
Toggle Icon

Hanh Test CWC 3_Update

Category Link Icon
Toggle Icon

Test 3.1

Category Link Icon
Toggle Icon

Hanh Test CWC 5_Update

Category Link Icon
Toggle Icon

Test 5.1

Category Link Icon
Toggle Icon

Hanh Test CWC 7 lan 36

Category Link Icon
  • AerialGuard® aerial cable (tree wire and spacer cable) is intended for use in overhead primary and secondary distribution systems rated 15 kV (nominal) typically where space is limited. The track-resistant 2-layer covering prevents short-circuits and flashovers in the case of an unintentional contact with the overhead conductors, such as with trees or wildlife. When installed correctly, this system is effective at preventing system outages, damage, or fires as a result of falling trees or branches.
  • Tree Wire
  • When used in a tree wire power system, it is installed in a flat or nearly flat configuration, in a similar manner and spacing as with other bare or covered overhead conductors, except with a narrower right of way or corridor. Self-supporting conductor materials, such as ACSR are typical in this type of installation.
  • Spacer Cable
  • When used in a spacer cable power system, it is installed with a uniform spacing in a diamond configuration maintained by spacer hardware. The spacer and cable assembly are supported by a bare messenger, such as bare ACSR or galvanized steel wire. Spacer cable assemblies occupy minimal space, requiring the narrowest of right of way or corridor. 2
C5 555 test

Packaging

Notes:
  • TEST PACKAGING NOTES